We offer Variable Frequency Drives, L 200.

L200

Operation Source Switch
Run command/frequency source are easy to select with a DIP switch. Default is keypad settings. Sliding
the switch changes the sources to the control terminals.

Improved PID Control
Reverse PID function changes the sign of the deviation value which is the difference between target and feedback values. Upper and lower limits from a target value can be imposed on the
inverter output frequency.

Logic and Output Timing functions
Output terminals can be assigned logical operators AND, OR and XOR with RUN, AL and so on. ON and OFF delay times are settable for each output terminal. Allows for more flexible system design.

Analog Setpoint Calculate Functions
An offset frequency can be added to or subtracted from the output frequency when ADD terminal is ON. For example, if output frequency setting is 40Hz and offset frequency is 5Hz, output frequency
becomes 45Hz (or 35Hz) when ADD terminal is ON.

Integrated EMC Filter Versatile Functions
Reduces electromagnetic noise. (on European-Version unit only. Effective for only single phase
input for 200V class models)

Global Performance
Conformity to global standards. CE, UL,
c-UL and c-Tick approvals.
Pure analog monitor output (8-bit, 0-10V DC)
External thermistor terminal (PTC)
Side-by-side installation
Second motor setting
Over-voltage suppression at deceleration
3-wire control
Analog input selection
Second acceleration/deceleration setting
Jogging
Unattended start protection (USP)
Analog input wire-break detection
5
Easy Maintenance
Detachable cooling-fan. 6

RS-485 Serial Port
An RS-485 communication port with
Modbus-RTU protocol is integrated.

Please feel free to contact us.